Home E-Mail Request Additional Information Polyester

 

PRELIMINARY DATA

PET - M H160 POLYESTER FILM
48 GAUGE CHEMICALLY PRETREATED
METALLIZED POLYESTER FILM

Phoenix "PET-M H160L" is a high barrier, metallized, polyester film with chemical pre-treatment beneath the metal surface and corona treatment on the non-metallized side. This metallized PET film offers improved metal adhesion, excellent gas, moisture and light barrier properties on a base sheet of Diafoil chemical/corona treated PET film. "PET-M H 160L" provides good puncture and flex crack resistance. This metallized, hi-adhesion polyester film exhibits the following features:

  • Improved metal adhesion to the base sheet
  • Excellent gas, moisture and light barriers
  • Improved adhesion on the non-metallized side due to corona treatment
  • Excellent dimensional stability reduces film shrinkage during processing

Typical Properties

Properties   Unit Typical Value Test Method
Physical Density g/cm3 1.4 ASTM D 1505
Haze % 2.8 ASTM D 1003
Tensile Strength MD kgf/mm2 >15 ASTM D 882
TD >15
Elongation MD % >60 ASTM D 882
TD >60
Tensile Modulus MD kgf/mm2 380 ASTM D 882
TD 410
Impact Strength kg/cm    
 
  Co-efficient of Friction

(23°C, 65% RH)

Static F/F

Dynamic F/F

>0.34 ASTM D 1894
  Thermal Shrinkage

(150°C, Air 30 min)

MD %   ASTM D 1204
TD  
Barrier WVTR

(20°C, 90% RH)

g/m224 hrs <1.2 ASTM D 96
  Oxygen Transmission

(20°C, 90% RH)

cc/m224 hrs <0.7 ASTM D 3985
Optical Ultra Violet Transmission %   Spectrometer
Visible Light Transmission %   ASTM D 1003
Gloss (60°) (Metal Side) %   ASTM D 523
Metal Thickness >500 Conduct Meter (Hitachi CDM-3)
Optical Density % 2.5 - 3.0 Macbeth TD904
Laminate Peel Bond Strength gf/15mm @ 180°C & speed=300 mm/min 200 - 230 Adhsv (Dry) Lamn Extrusn Lamn
240
Pinholing Resistance cc/m2 - 24 hrs   Bending (Times) 0
50
100

Note: The technical data contained herein are guides to the use of Phoenix films and are based upon tests and information believed to be reliable. Users should not rely upon it absolutely for specific applications. Phoenix Films makes no guarantees of results and assumes no obligation or liability in connection with its advice. This data is not be taken as a license to operate under, or recommendation to infringe, any patents.

F.D.A. STATUS: PET films sold by Phoenix for food and medical packaging uses comply with U.S. Food and Drug Administration requirements under the Federal Food, Drug and Cosmetic Act as amended.

 

Home E-Mail Request Additional Information Polyester

Phoenix Films, Inc.
P.O. Box 3816
Clearwater, FL 33767
727-446-0300
sales@phoenixfilms.com