Triple Nylon Characteristics

Characteristics of Triple Nylon

1) Comparison with other products

Test Item		Unit	Test Method	Triple Nylon	LDPE	PP
Tensile strength	Vertical	kg/cm²	JIS-Z-1702	400	200	400
Tensile strength	Horizontal	kg/cm²	JIS-Z-1702	360	150	300
Elongation	Vertical	%	JIS-Z-1702	320	360	550
Elongation	Horizontal	%	JIS-Z-1702	250	620	700
Elasticity Modulus	Vertical	kg/cm²	JIS-K-1727	2,900	1,900	4,600
Elasticity Modulus	Horizontal	kg/cm²	JIS-K-1727	3,200	2,200	6,000
Tearing strength	Vertical	kg/cm	JIS-K-6781	110	70	180
Tearing strength	Horizontal	kg/cm	JIS-K-6781	120	80	170
Moisture permeability		g/m² /24hr 40deg.C 90%RH	JIS-Z-1702	11	11	6.5
Oxygen permeability		c.c/m²/24hr 23deg.C	ASTM D1434	39	3,500	1,200

The above values are examples of measured values for the film thickness of 0.06 mm and not guaranteed values.

2) Film thickness and oxygen permeability

3) Comparison of Triple Nylon Series

40	*
			*
30					*
							*
20									*

10

0
	0.06mm		0.07mm		0.08mm		0.09mm		0.10mm

	Type	Triple Nylon	Triple Nylon Soft	Triple Nylon hard
Item		Triple Nylon	Triple Nylon Soft	Triple Nylon hard
Pin hole resistance		o	x	o
Heat resistance		o	o	x
Easiness to heat seal		o	x	o
Heat seal strength		o	o	x
Heat resistant seal strength		o	o	x
Oil resistance		o	o	x

Triple Nylon Standards

Layflat width

80 mm to 720 mm

80 to 300 mm: 5mm interval

300 to720 mm: 50 mm interval in principle

Thickness

0.06 mm to 0.10

Provided that it shall be 0.08 mm max. for the layflat width of 600 mm or more.

Please inquire us for special sizes not given above.

Phoenix Films, Inc.
P.O. Box 3816
Clearwater, FL 33767
727-446-0300
sales@phoenixfilms.com